Creality WiFi Box
Tech | Tools – Creality WiFi Box 2
Need a boost, WiFi or Bluetooth connection for your Creality printer? How about the Creality WiFi Cloud Box 2.0?
Those of you who might be use to the idea of ‘airprint’, or print-over-wifi or can print on a WiFi/Bluetooth ready 3d printer, know how easy it is. It’s easy to sit down, run through your sketch or drawing export, send the slices to a printer via WiFi/Bluetooth, kick off a print via wifi/bluetooth sketch and print.
Before I go into the best case scenario, let’s cover the old school models. Like me, those of you, who utilize old printers, nano sd cards, usb 2 cords and swap nano SD cards and usb sticks. Those of you who might want to skip ‘the chair slide back-and-forth, switching usb dongles and nano cards’… again, it’s old school, it works, manual; yes…
Please note, we haven’t set up the Creality WiFi Box just yet. We will get something up here shortly, once the rebuild is complete ~give or take a week or two to wrap up the build. Rebuild pt 1 – Rebuild, install new drive, assembly and back plate. can be found here. While we are currently reconnecting the new assembly housing, heating element etc. Rebuild pt 2. start today or tomorrow.
With that being said, we’ll cover the Creality solution for older 3d printers, more specifically the Creality WiFi Box with the Ender 3 Neo Max.
New Creality Series
Creality 3d Printing – Ender 3 Neo Max & Halot Sky
Lab Work – Creality Settings
3d printing? Got a need, give us a call. We will be posting a bunch of new work in the weeks to come. From testing and prototyping, 3d model printing and extruding, resin printers vs PLA/TPU filament printers, trials and tribulations; i.e. issues we experienced when running our 3d printers.
Attached a few sneak peak video clips and photos of our latest test prints and demos. Got a few ‘real-world’ solutions coming out soon… We will put a few polls out regarding 3d software/applications – Tinkercad, Autocad, Creality (design) software, Solidworks and more. We’ve started with Tinkercad and Autocad so that we can print prototypes to finish products within a few hours. Got any ideas? Need 3d prints? Leave us a comment, drop us a line on the Connect, please include: file type, filament, sizes etc. Let’s see what we can come up with.
As usual leave a comment below, let us know what you’re thinking?
Creality – Ender, Halot (Resin) or Prusa 3d
3d Printers/Resin Printers – Creality or Prusa
Gear – 3d Printers
With the holiday season in full swing, thought it might be worth while to do our research on a 3d printer… Extruded filament or resin? Which brand should we choose? Cost/Benefit?
We found one that fit our needs, more information once the device has been received, we’ll post an update on the device, 3d lab startup, first runs etc. Let me know in the comments below, do I go Prusa or Creality CR Series Ender series or Halot Series… There are a couple different models, filament types, series etc. to choose from; we are looking at the Ender 5 Plus, Halot Series (Resin) vs the Prusa I3 MK3S+. Perhaps some other tools to go with the printer as well, wash/cure, filament, bed, boxes/enclosures etc. Lot’s of etc etc. The point is we are looking for the best option for us, help us understand why and what might have been part of your decision to purchase a 3d printer. Should we choose something else? Dremel, MakerBot, Ultimaker, LulzBot… more out there, but we cut the list down to the two noted above.
As usual leave a comment below, let us know what you’re thinking?
