Downloads… we cover motherboards, cameras, flight controllers, software, OS ISOs and more! Follow along as we share download sources.

Board and Slicer Downloads

Downloads, Boards, Slicers & More

Creality – Ender 3 Max Neo, Halot Sky & Prusa

Creality v4.2.2 Board

Tech | Tools – Software Support

Board and Slicer Downloads – For future use, especially those of you who are using a Creality Ender 3 Max Neo 3D Printer. If you who have Creality products, and are printing with the Ender series, you may require the following software, which has already been used in different stages of the rebuilding process: Ender Build articles, Series 2, Ender TPU Upgrade.

Here is the list Board and Slicer Downloads:
Creality Halot Sky – Firmware or Slicing (bottom) – https://www.creality.com/pages/download-halot-sky?spm=..page_1934481.products_display_1.1&spm_prev=..index.header_1.1
Ender 3 – Neo Max – Firmware – https://www.creality.com/pages/download-ender-3-max-neo?spm=..product_3b7a3c8a-7861-4186-9818-614e8eb14170.nav_link_store_1.1&spm_prev=..page_1967279.products_display_1.1 or Slicing (bottom) – https://www.creality.com/pages/download-ender-3-max-neo?spm=..product_3b7a3c8a-7861-4186-9818-614e8eb14170.nav_link_store_1.1&spm_prev=..page_1967279.products_display_1.1.

Also, included:
Prusa I3 MK3S+ Kit – Firmware, Drivers and more

Ender Filament and Adhesion Issues

Filament Challenges and More

Print Plate Surface Adhesion and Heating Issues

3D Printer Adhesion Issues with PLA and TPU

Lab Work – Ender Issues Defined

A few more weeks of Ender issues…

Ender Filament and Adhesion Issues, are causing a delay in the TPU Neo Max upgrade progress. I will be sharing more Ender ‘lite’ issues, as we continue the TPU trial and face filament challenges. The filament change was primarily for lab work on bait designs and future locking mechanisms where TPU will be more appropriate. Despite this tangent, core printing has not ceased, I am still facing challenges with PLA.

Ender Filament and Adhesion Issues

There are countless issues that seem infinite at the moment. Everything from  Creality Software to Ultimaker Cura, Sonic Pad issues, filament running temp, and new surface temperature problems… we have a lot of cover. I will break these down into 2 or 3 new posts over the next week. We will also revisit surface adhesion. Surface adhesion and surface temperature seem to be causing most of the issues on the Ender Max Neo. I must admit, tinkering doesn’t always result in perfect prints, even 60% to 80% of the time. I won’t argue, I’ll just focus on testing… the more runs, the better chance we have of increasing that 60% likelihood of successful prints.

Pictures will follow,  as they say, a picture is worth a thousand words. The pictures will be shared to specifically cover thickness, fragility and test prints. Let’s get to printing!