Ender Upgrade Adhesion Issue

Adhesion Issues, Bed Temp

Latest Ender Chaos

Ender Issue 26

Lab Work – Humor Is The Only Way Sometimes

The Lead, 6 hour+ print chaos; let’s address and tackle these Ender Upgrade Adhesion Issues. We will put the Halot Sky Resin vat cover issue, on hold and focus on the Ender 3 Neo Max bed adhesion problems. It has taken over 5 hours to troubleshoot, with fans running and a cooling bed plate. There are numerous issues to tackle!

Let’s Troubleshoot
Extruder Pressed Down

Extruder Pressed Down

Bed Inspection

Bed Inspection

Extruder Removed

Extruder Removed

Sensor Globule

Sensor Globule

Heating Element

Close Up

Track Bands Off

Track Bands Off

Missing Tension Knobs

Missing Tension Knobs

Extruder Into Plate

Extruder Pushing Plate

Current Status, Visual Check

Secondly, we are missing hand-tension screws and tension belts. There is a literal mess of PLA covering 60% or more of the printer, extrusion head, bed and assembly. Fortunately, I walked in post-print as a tension belt was in the process of removing itself from the printer head.

That concludes the visual inspection portion of the Ender Upgrade Adhesion Issue. Moving forward, we have the printer head back together, PLA cleaned off, tension belts applied. Next and not captured below, replace adhesion plate, tension screws, and restart the machine for calibration. Look for update posts here in the next day or two.

What is the purpose of the print? I wanted to put a cover on the Halot Sky (V1) Resin vat, but I am not sure where the original cover might have gone – it could have been misplaced, broken, scrapped or lost. More importantly, the print itself was lost. From the perspective of the ‘pressman’, the printable seems to have failed to adhere to the build plate. After checking the settings, it was discovered that the ironing was off, and the printer head was buried into the print plate. This is not good for the printer or its parts. Additionally, there was a concerning sound of tension belts releasing and printer head/plate friction. However, the print fix is currently being fixed, and we will provide an update at a later date or time.

Finally, we replace build plate, hand screws, springs, restart/update firmware and calibration.

Leave a Reply