Dolphin Nautilus Archives

Dolphin Nautilus, by Maytronnics. Have a pool, give the Dolphin Nautilus CC Plus Robotic Pool Vacuum Cleaner a try in your pool today.

August 20, 2024September 27, 2024

Dolphin On

Maytronics Nautilus CC Plus Repair Update

Dolphin On

Lab Work – Maytronics Repair, Dolphin On, Post Hurricane

Parts are in, Dolphin Has Been Repaired, Cleaning Away

Let’s take a closer look at the process. Upon further inspection, I found corrosion around the motors. The seal around the power cord also appears to be in poor condition. So, I proceed with a teardown, replacing the power unit, and tread ball bearings to restore the robot back to full capacity with genuine OEM parts. A self-test was performed as need, I conducted a number of in-water and out-of-water tests which worked perfectly. As it should, under normal power. Next, I replaced all parts and picked up where we left off on the last article Nautilus Down (check that out if you missed it).

Pre-Check, Install and Test

Check all cogs, ball bearings, drive pin, and wheel/hub parts. Make sure ball bearings are moving freely and free of rust or degradation. Replaced any parts showing degradation or major rust. Filled electronic parts and pressure seals with pool lube and reconnected parts, careful to screw-down fasteners and plastic nuts with appropriate tension. Dolphin On. Additionally, both out-of-water and in-the-water tests performed as expected. Time for a swim! Cinched down any screws, or screens, package up the robot and ran the clean cycle.

Robot Build

New Unit

Unit Connector

Dry Fit

Tread Check

Proper Fit

Motor Check

Dry Test

Post Test

Brush Down and Toggle The Dolphin On

If you can’t tell, the pool has sand, debris and dragonflies. Before we toggle the Dolphin On, let’s do a quick brush down of the pool to encourage removal. You can kind of see here the pool was a bit dirty, as the hurricane kicked up enough debris for the Dolphin to clean. There was no pool cage carnage, or aluminum part failure, which is great. Minor screen damage only.

Maytronics Documents and More

Finally, following the test cycles, Dolphin on, put in the water and cleaned the pool well. In most cases, the vacuum actively cleans on stage 1, please the Maytronics manuals. Find Stage 1 testing and more robot testing features under the Nautilus CC Plus section. I hope this information helps, how to get your pool robot fixed and Dolphin On. If anyone out there needs assistance, please contact me I am happy to help. Thanks! As usual leave a comment below to let us know what you’re thinking!

August 14, 2024September 27, 2024

Dolphin Down

Maytronics Nautilus CC Plus Repair

Dolphin Down, Waiting On Parts

Lab Work – Maytronics Repair, Dolphin Down. Let’s fix the Nautilus CC Plus

Looks like a new motor unit is required. Full teardown ahead.

Exciting news! A new series, Dolphin Down, is coming soon. This series is related to the repair of the Maytronics Dolphin Nautilus CC Plus. Currently, we are awaiting the arrival of a new motor unit. In the meantime, we are in the process of dismantling the Nautilus CC Plus robot in search of a malfunctioning drive motor.

The fan motor is functioning properly, passing both tests passed – underwater and out-of-water tests. The multimeter has confirmed that the drive motor is not working. The circuit board appears to be in good, working condition confirmed by the blinking green LEDs. The LEDs indicating that it is functioning as expected. This a positive sign for our robot and the repair diagnosis.

Robot Teardown

Housing

Screen Key

Prop Screen

Cord

Internals

Motor Unit

Remove Prop

Prop Residue

Sealed Cord

To begin the teardown process, find a safe spot and grab a multi-tool with pliers, flathead and cross bits (Phillips bits). Start by removing the power cord from the unit and unplugging the unit from the wall if necessary. First, on the Dolphin, unscrew the four screws under the filter doors to remove the top. Use the transparent or white flathead key or knob to pop open the propeller gate, which is easily accessible once the filter doors are open.

Next, slide the cord out from under the blue, body cover after removing the four main screws. Adjust the cord, remove the floats and be careful when removing the side panels. These panels should just pop off top down. Just be aware of the tabs on the bottom of the panels, this is what hold the body shells in place. Use the pliers to unscrew the blue cord connected to the power unit, as well as the four screws holding the two yellow cord strips to the unit. Unscrew the four unit screws holding the motor unit in place and it will be free.

Robot Teardown

Drive Bearings

Motor Unit

Motor Case

Remove Unit

Board Check

Drive Motor

Finally, check all cogs, drive belts, and wheel/hub parts. Ensure that the ball bearings are moving freely, unobstructed and are free of rust or degradation. Replace any parts that showing degradation, wear or significant rust. Fill with lubricant and reconnect parts, being careful to screw with appropriate tension. Test the robot out of water first, followed by half-submerged and fully submerged underwater tests. *Updated – Check out the repair – Dolphin On or the first post we commented on regarding the Maytronics Nautilus Dolphin for more information on troubleshooting, maintenance and repairs. More information will be provided in the next *5 business days, as we will be receiving the new motor unit packaging up the robot and running the cleaning cycle. Thank you.

As always, feel free to leave a comment below, let us know your thoughts!

February 14, 2024September 27, 2024

Dolphin Nautilus

Nautilus CC Plus (Wired)

Pool Robots by Maytronics

Dolphin Nautilus CC

The Dolphin Nautilus CC pool vacuum, made by Maytronics Dolphin, is designed to remove debris, brush, vacuum, and maintain pool clarity.

Everyday, the Dolphin Nautilus activates, moves around the pool, cleans, and maintains buoyancy upon completion. It comes with a price tag, so choose wisely! We received a recommendation from our pool guy, which was great advice – try the Dolphin Nautilus robot vacuum. The goal is to reduce water evaporation, maintain water and chemical balance, minimize chemical corrections and keep the system clean.

Drone Accessories

Nautilus Back

Nautilus Cleaning

Wall Climb

Clean Filters

Nautilus Cart

Now, lawn equipment can spread dirt, grass clipping, environmental debris, pet fur, and screens with holes. Various types of debris can become spoilers when found in the pool. I assume that most, if not all, of this debris is kicked up by mowers and blowers as they are the main vehicles for debris getting into the pool. For us, sand from the brick pad seems to wreak havoc on our pools ‘clarity’. So, the sand, bugs and debris from lawn equipment…

More Maytronics Product Information

The Nautilus is a great product that is not terribly expensive when compared to other devices in the same space. We chose this specific product because it lacks excessive technology. We simply wanted a low-maintenance clean that could operate in the water, clean effectively, run various cleaning cycles and be easily stored on a cart when not in use. The cart allows for easy storage or movement, especially for pool usage. It can simply move the robot away when swimmings are in or around the pool. This means swimmers can splash around, stir up the water and not worry about damaging the robot. The universal cart works wonders, although it may be pricey for some. It makes tasks like bending down, lifting, and storing the robot a breeze.

Cost, cleaning time. The machine is easy to clean. Power down the machine, pull up the robot, open two doors, pull out the filters, unlock the filters with four clicks, and start the wash. Cleaning and maintaining the screens is much easier when considering the cost and cleaning time of the entire pool compared to a quick rinse under the faucet to remove debris. Moving back to the robot, snap the filters into the housing, replace them on the machine, submerge the robot, and power it on…

Quickly, I wanted to share some other Maytronics Dolphin content, newer content since the original Nautilus article in reverse order, so the fix is first (up), issue second(down): Dolphin On and Dolphin Down.

Moving on, no app for us, once again we opted for the Dolphin Nautilus robot in its manual version (corded, non-wifi enabled) to keep costs down. It suits us well since our pool remains uncovered year-round; the robot makes its way around the pool once or twice a day, providing low-maintenance, no-frills pool cleaning. Personally, I would prefer to cover the pool at night to retain heat and reduce water evaporation. But for now, we’re happy with our choice. This recommendation came from our pool service, not a paid advertisement, so a big thank you to them!