Gear – Different from Tech and Tools, gear might include the ‘gear’ we use in and around the office. Gear for camping, survival, day-to-day living and creature comforts in some cases e.g. gaming chair.

Drone Accessories

Grab Your Drones, Goggles and Transmitters – We Are Racing

New FrSky Taranis Q X7S, Quadcopter Blades, Batteries and Toggle Caps

Taranis Carbon Fiber Transmitter

Gear – Drone Accessories

Adding our at-home, indoor flight “program” (a little tongue-in-cheek), we have new accessories, transmitters and blades – let’s race!

With our Amazon order received,  we have a mixed lot of parts and accessories. It’s time to break out the racing drones again, as we needed a few bits and parts to get them flying just right. A new transmitter, a second FrSky Taranis QX7S (Carbon Fiber) Remote for a second racing drone along with blades and batteries. The goal was to fix what needed fixing and get ready for racing.

And racing we shall! With side-by-side flight, using dual transmitters, we can race real-time, with similar nano drones for indoor racing games. I’ve added toggle caps/covers for those new to quad racing – these caps provide pilots and hobbyists with visual cues and help reinforce muscle memory for which  toggles are active. This aids in remote usage and recognition during take off, flight, landing and crashes.

Lastly, we are in the process of turning over our battery collection, some of which are over 4 years old. A few have problems, but around 4 to 5 remain in good or optimal shape for flight. So,  with a few extra batteries (8 in total, 2 packs of 4 batteries) we can enjoy 15 – 20 minutes of real racing time, assuming normal flight ranges and pilot skill.

Drone Accessories
FrSky Transmitter

FrSky Case

New Taranis Transmitter

New Taranis Transmitter

Carbon Fiber Transmitter

Carbon Fiber Transmitter

Transmitter with Toggles

Transmitter with Toggles

Ready 4 Flight

Ready 4 Flight

Toggle Covers

Toggle Covers

Avan Blades

Avan Blades

EMAX LiPos

EMAX LiPos

Racing Drone

Racing Drone New Blades

Racing Drone

Racing Drone

Dual Racing Drones

Dual Racing Drones

For those of you interested in learning more about the drone hobby, or wanting to see more. I have one more resource for you: the Drone Racing League. The league flies all around the world, but more specifically the race in Germany. The league race took place at DHL Tower – Race 6 (EU), where drones are reaching speeds over 100mph and race skyward over skyscrapers, performing flips beyound your wildest imagination. The race features super high-end drones and professional pilots running quadcopter and competing for money! It’s crazy tech in action.

Other Drone Resources

If you’re new to quadcopter(s) and are wondering what to buy – drones, drone accessories etc., FPV (First Person View) flight, check out @Bardwells YouTube channel for all kinds of tips and fixes (my goto for FC and BetaFlight help). Most videos are extremely detailed, with the goal of getting you hooked! Shout out to Joshua, he’s a legend as his videos played a pivotal role in getting the EMAX drones bound to the original Taranis transmitter via BetaFlight. For parts, check out our shopping list, where I’ll post links to the quadcopter(s) (drones), parts, accessories and more.

We also have a number of articles on the subject matter; including the Emax TH2, drone repair, full-sized drone operation, video in flight and more. Feel free to preview those any time. Interested in a full sized video drone? Check out the DJI Phantom Pro series as well. 

Although it’s been months since we posted anything related to the Taranis Q RC transmitters, more can be found here. Also, if you’re interested in more Emax lab work this two part Emax Series – Part 1 and Part 2 is a great place to start. In order would be best to explore this content, or if you want to jump to the conclusion click on Part 2 for the fix.

Before we sign off, we have to plug our own shopping list, the drone accessories will be posted on the site shortly.

GTRacing Mesh

Mesh Back, Ergo Support, Full Recline and Leg Support

GTRacing Mesh

New GTRacing Ergonomic Gaming Chair Black/Black Mesh Back

Relax in the new GTRacing Mesh Back Ergonomic Gaming Chair,  which features a reclining mesh back, footrest, adjustable headrest, and lumbar support. This chair is a great option for those looking for a big and tall chair at little to no additional cost.

Purchase Your Own GTRacing Chair

Get the ‘black/black’ GTRacing Chair for your office, home office, maker-space or game room today! We were fortunate to inherit the previously gently used maker-space GTRacing chair, which will now live on in the gamer-space, alongside the PS5, featuring Logitech racing peripherals such as wheel, shifter, pedal pad and racing wheel stand. Meanwhile, the new GTRacing Ergonomic Mesh back chair will handle the heavy lifting as the daily driver.

This flexible, lightweight gaming chair is sure to keep you comfortable. Stable and cool, it’s ideal for those summer months. Lounge in luxury throughout the workday while maintaining a positive ergonomic body positioning. We’re looking at you, late night gamers, makers and nighttime creators. Spending long hours in a chair can be grueling, and for some, it’s a requirement depending on the type of work per se.

To all you makers, gamers, and influencers out there, if you’re a hobbyist of a kind, choose GTRacing. We’ve had great luck with GTRacing Chair Updates, and Office Furniture, see previous commentary and reviews…  ironically, we covered the first GTRacing Gaming Chair purchased and a service warranty issue that was quickly resolved by GTRacing Co. The chair has maintained its comfort over its lifetime here in the office. Now, with a little tongue-in-cheek humor, the new GTRacing Mesh Back will be the primary office chair, while the ‘gently used’ one is saved for gaming. It’s a win-win all around.

Ultimately, we chose another GTRacing chair for it’s comfort, flexibility, and now the fresh mesh back. You have to stay cool and breezy with the GTRacing Mesh Back gaming chair. Additionally, one product enhancement is that both armrests remain connected. They pivot with the chair as it reclines maintaining a similar position and height of the arms. This is handy when the chair is in ‘sport-mode’.

Pick out a GTRacing Mesh Back Gaming Chair Today.

New 2024 Merch

Buy Sallee Technology Merch

New 2024 Merch Includes – Richardson Performance Trucker, T’s, Umbrellas and more

Sallee Technology LLC Merchandise

Gear – Hats, Nike Zip, T’s, and More

Get yourself some gear, new 2024 merch now in stock! We’ve got Sallee Technology gear featuring The Game, Zippo, Yeti, Columbia, Champion, Flex-fit and more.  We are also offering, new golf umbrellas, Richardson Performance Trucker hats and T’shirts.

We have more “swag” and gear for your liking. For 2024, we’ve added new merch that we haven’t carried before such as Nike Zip Hoodies and Richardson Trucker Hats. Email me, and we will get sizes and gear out to you as soon as we can. Additionally, we have Yeti products, Reebok Zip Hoodies, Zippo Lighters, and Yeti drinkware in stock.

We’ll be releasing some quarter zips, and maybe some full zips without hoods. I think those will look nice and compliment the Columbia zip (medium weight) jackets. For those of you in cooler climates, you might consider those warm, durable Columbia full zip jackets. On the other hand, for those in warmer climates, T’shirts and sweatshirts might be more your style.

Posting in reverse order, from the current offerings, current stock –
a. Current offering below in this post – Hats, Sweatshirts, T’s and Umbrella’s
b. Original Series Yeti, Jackets, Hats
c. Second Series Yeti’s, Hats and Zippo

Available New 2024 Merch (Q2)
Richardson Trucker Hats

Richardson Trucker Hats

Richardson Trucker Front

Richardson Trucker Front

Simple T-Shirts

T-Shirts

Nike Zip Hoodie

Nike Zip Hoodie

Umbrella's

Umbrella’s

Holiday Merchandise

Holiday Gear Update –

Richardson Performance Trucker, Nike Zip Hoodie, T’s, Umbrellas and more

NEW Sallee Technology LLC Merchandise highlighting new color palette

Gear – Hats, Nike & Reebok Zips, Polos, T’s, and More

Get yourself some gear this holiday season with Sallee Technology merchandise featuring brands like The Game, Zippo, Yeti, Columbia, Champion, Flex-fit and more. Our new Golf Umbrellas and Richardson Performance Trucker hats are about to go into production. Our goal is to have the new hats ready before the holidays, aiming for the week before. I am grateful for the new partnership we have formed with a local print shop, a big shout out to Promo and More. Angela, thank you for your great support!  They have been incredibly helpful and willing to work on complex concepts and designs. It’s fantastic to have them on board!

New Gear For The Holiday Season

A full list of gear types, sizes, colors, etc. will be posted shortly. However, a sneak peek may be worth it’s weight in gold here… All navy Richardson Performance truckers… great products, great marketing gear.

Give us a shout out for Holiday Merchandise, contact us if you’d like to support us and purchase Sallee Technology gear. We will be bringing back the polos next year ’24 or ’25. Let us know what you think about the merch, or if you’re looking for something special, a one off print, or a special order.

Whether you have small orders or large orders, we don’t care we are happy to accommodate where applicable. Just let us know what you’re thinking. Let’s chat, either connect with us via phone or email. We are happy to work with you and find what you are looking for.

Capo

Finding A Replacement Capotasto

Fender, D’Addario or Kyser

D'Addario Capo

Gear – Capo (Capotasto)

20 mins a day, now includes a capo.

I’ve checked all around the shop, the office, and the home etc. Everywhere. As you know from the post title, I had to find a replacement Sweetwater – D’Addario arrives and we are back in business. For those who need more information on the guitar clamp, the clamping mechanism is in use when a player places the capo on a desired fret to ‘shorten’ the fretboard, bringing the nut to the higher number frets. Ideally, we picked this one up, for both acoustic and 6-string electric guitars.

Quickly, I’d like to note the missing accessory. The original is somewhere around the house, but it is noted here – the Sweetwater – Kyser. A great piece of kit, black, easy to use for those of you who might want to start practicing with a capo. Both are great capo options the Sweetwater – D’Addario or Sweetwater – Kyser, get yourself one today.

If you’re looking for other guitar accessories, give this a shot – @GuitarZoom 20 mins a day, might be your; ticket to guitar stardom.

While you’re shopping those of you who refinish, build or part out guitar builds… or looking at improving your guitar acumen with a capo. It’s important to set the action or correct the truss rod in those guitars (acoustic, electric, bass and classical guitars) that have them (which is most). That said, be sure to check out what’s called luthier gauges for quick and easy measurements and action changes. A nice-to-have, this hand tool is a great addition for those who maintain their guitar or bass arsenal.

Filament Spool Update

Filament Rack, Digital Scale, and Spool

Creality Digital Spool Rack

Spool Rack

Gear – Filament Rack

Needed an additional part/piece, this Creality Spool Rack.

Today, we have a Filament Spool Update and the final accessory to add to the TPU upgrade build. Dare I call it the final piece of the puzzle for the build.

What are we looking at here? It’s a top-mounted (overhead) rack, specifically the Creality Digital Spool Rack. The rack, or filament management rack sits atop the main brace/cross-bracket framing structure as shown below (see new spool image). The spool rack will allow for multiple filament types:* PLA, ABS, Nylon, Wood, and TPU *assuming the filament comes on a spool, regardless of the size. It’s important to note that Creality includes a portion of filament or test filament with a new or refurbished printer. This information is helpful for new 3D printer users.

The advantage? TPU specifically can unwind and pass through a top cross-brace funneling mechanism directly into the new direct drive extruder. This serves as the new static filament storage area/piece. For those of you with a Bowden drive, you may not understand, but after the upgrade, we needed a way to feed filament to the direct drive extruder. This serves as the solution. 

3D Printer Accessories
New Spool

New Spool

Digi Spool

Digi Spool

Spool Rack

Spool Rack

Creality makes this handy filament rack, replacing the OEM side mounted rack. It’s perfect for filament management – size, weight over time etc. Same as the  OEM rack with a few upgrades like a bright, digital scale. The rack has a large, bright digital scale Interface, a great visual for filament volume, space and duration. 

The key here, as part of the Filament Spool Update, the digital read out (interface) built into the spool mount brings ‘site by volume’. And as you can imagine, this can help predict usage, and consumption rates. More importantly, cost per item or printable. It’s small enough to screw to the topside of the support frame. The interface is bright enough to work in the dark, cast enough light onto the printer bed. Note, all filament types in spool formant should work on the rack, TPU, ABS, Nylon, Wood and/or PLA. All material come into scope once the direct drive is up and functioning as expected.

Gadget Backlog Update

Let’s Look At the Gadget List

Klein Screwdriver Set, SHURE MV7 Podcasting Kit, and Aupus Air Duster

Gear – Backlog

Quick update on the Gadget Backlog, SHURE MV7 Microphone Podcast Kit, Air Tools – Inflators, Nailers Gauges and Compressors (out soon), Air Duster (A.K.A Air “Cannon”) and Klein Tools Precision Screwdriver Set.

Both positive and negatives, the Klein set is a big win, those of you needing a sleek, high-quality, tech/electronics platform; Klein is the way to go. Same for the Aupus Air Duster… a handy, handheld, to blast away dust and debris… And the SHURE MV7, same on quality, and crisp sound quality, the best with SHURE.

Let’s start with the ‘good’ vs the ‘bad’ or ‘ugly’ movie reference “The Good, The Bad, The Ugly – Clint Eastwood”. Let’s cover the precision screwdriver set and air duster.

Klein Tools Precision Screwdriver Set

First, the Klein All-In-One Precision Screwdriver Set. If you’re working with smaller appliances – coffee/espresso machines, vacuums, toys, gaming equipment, computers, phones or tablets (Apple specifically). You’re gonna need an elevated, array of tech gear and tools such as – glues, adhesives, adhesive ‘strippers’, grounding elements or bands, gloves, fans, shims or prying tools, same for hex/Torx bit heads… Just to name a few.

In many cases, if one was to change out a generic computer battery (Apple MBP) you might need – micro Phillips-head/Torx, pry tool, shims, glue stripper, gloves, heating elements, grounding band, adhesives and then the micro Philips-head and Torx to secure the updated battery array and shell Hopefully you can understand here, the Klein All-In-One covers the range of electronic screws and bolts used in the latest gear.

Just want to spend a few mins on the screwdriver set which comes in a sturdy, rugged, hard plastic box (tough box)… with what Klein calls a stay-shut latching mechanism, again, handy to have when your carrying mini-bits/drivers around. The case is great for indoor/outdoor, ‘shop-like conditions’ which may not be pristine per say. Contained within the tough outer shell, a magnetic hand screwdriver base or platform for ‘finger tightening/loosing’, a preformed bit section for 39 extra-long driver set which includes – flatheads, hex, Torx, square, star and Phillips-head bits.

Those of you needing Apple specific driver bits, check out this set and pick yourself up a set(not a paid advertisement). High quality stuff, easy to use and magnetic. Always nice and handy to have magnetic tools for very small applications, those of you who require small tools for small screws, clips and bolts. Great set for those who need one, pick one up a Klein Tools.

Aupus Air Cannon

Moving along now, staying with the ‘Good’. No cans, no more air canisters, missing straws, cold hands and/or the storage space for air cans. Nope, the Aupus Air Duster is a win for two reasons, space and strength. No need to save space for 5 or more cans of compressed air. We are talking desktop or storage space for those of you working in tight office spaces; the DIY(do-it-yourself).

The Aupus purchased has two settings of air pressure or strength, both will help push dust and debris out and away from it’s intended target. Sound is constant, no shuddering or sputtering, no power loss or surging. The air duster is made of rigid plastics, great for many applications around the shop – featuring a friendly grip, multi-speed selector, filtered intake and a set of cleaning tools – brushes, extension tube, additional filters and fine funnels for more precise air distribution. No batteries, just an old-fashioned plug and play, so, plenty of power where and when you need it when comparing the Aupus Air Duster to a generic can of air.

The SHURE Podcast Kit

Let’s transition to the ‘bad’ or mixed review now. The ‘bad’, might be a little harsh.. When sticking to the theme of “The Good, The Bad and The Ugly” perhaps the final product covers the bad and ugly. For the sake of the argument, let’s just use a ‘soft pass’ on the Shure MV7. Specifically due to it’s reliance on additional software. That’s the rub for this article. Which is where we feel it fails to meet expectations, so, a mixed review of sorts.

The positives, sure SHURE (SHURE MV7 – Podcast Kit) makes a great product, excellent sound quality, nicely packaged for various applications – live-streaming, home recording, podcasting and more. Hardware is what you would expect from the legendary Chicago, IL – Sidney SHURE founded audio/electronics and hardware manufacturer, for nearly 100+ years, producing some of the highest quality audio (electronic gear/hardware)… it’s tough to give this one a mixed review.

MOTIV Required

Honestly, I think this is why we might merge the ‘ugly’ with the ‘bad’. What ‘smokes out the deal’ for us, is the reliance on a secondary application called MOTIV. I get it, the software a need, a must. How else would you use the microphone? The software helps the user fine tune the collection of sound, amplification, distance of sound travel, and hardware recognition. Again, the rub, it’s yet another app/window chewing up space, floating desktop application cluttering up an already densely populated screen – browsers, live-streaming apps, video software, editing software and so on.

You get the picture, an ugly one. Although, you may not agree, that’s fine… this is where I think the experience falls short. If there ever was a time where  hardware shouldn’t require os manipulation or software. This is the time, we would have a winner. Again, great kit, includes all the connections one would expect these days, USB-C, XLR, a desktop mount for local sound collection, and crisp sound recording.

The product was built and sold as a podcasting kit, targeting those v-loggers podcasters and content creators. Or, the interwebs adventurers, the law tubers, the gamers, the influencer type  and/or home/office applications. All is well, until you understand, an application is required to download and run the physical hardware. The MOTIV app can be downloaded here, found on either App Store or Google Play Store. Caveat, multiple OS platforms, MacOS, Windows and Ubuntu. Honestly, this is not the solution for me. I was open to new gear and not said proprietary software running to manage external hardware.

Takeaway

Final thoughts, takeaway, give it a shot, the microphone is fantastic, sound quality is top notch. A home-run, if I might use a sports analogy as well.  If you’re looking for a reliable microphone, precision sound quality (bar-none), this might just be your winning ticket. For us, however, we will pass for now.

More on the next one, cheers

Gadget Backlog

Gadget Backlog Includes Items Shipping Soon

Magnet Switches, Extra (Shop) Batteries, Bodum Whisk, SHURE MV7 Mic, Aupus Air Duster, Klein Tools Precision Screwdriver Set, and Med. D’Addario Celluloid Guitar Picks.

SHURE Mic 

Gear – More Gear On The Chopping Block

What’s that in the box, ((shake)) ((shake)) what might that be? A new shipment, what is in ‘the box’ and on the bench.

Let’s start by sharing this on the big Gadget Backlog, is currently in progress, as space is somewhat limited at the moment. More information on that will be coming soon. As for batteries, I have a few Optima Red Tops ready to go, along with some outback welding where necessary. It’s fitting to mention magnetic tools and switches in this context. Yes, super strong magnets that can be switched on and off with a swift turn of the hand or a switch-type mechanism. This is a very cool item to have around the house, shop, or off-road adventures.

Angle Clamps, Mag  switches and More Welding Tools

I’m curious to know if the welding community has a preference for welding square/angle holders, clamps, plunger/light switch types, magnetic holders etc., perhaps at no cost. Obviously, if you’re out on the trail, off-roading, doing trail break-fixes, integrity and rigidity might take precedence over OEM specs on angles or manufacturer measurements. When it’s time to getting your off-road rig off the trail, would something like this help to bring your efforts in line with those manufacture specs per say. Anyhow, these switch magnets might be handy to have around the shop. Various types – Angle Clamps, Magswitch Clamp, Stackable Magnets or Adjustable Angle Magnetic Welding Squares.

So, let’s discuss cover what has been unboxed… the Bloom Frother. As you know, the hand mixer needed some adjustments. A few screws, new batteries, some isopropyl alcohol… and we are back in action. You all know I’m a big coffee and tea enthusiast, but if not, that’s okay too. I like my coffee and tea with a few pinches of Sugar in the Raw, and depending on the time of day, I may add some half-and-half to adjust the temperature.

There are a few handheld frothers out there in various color and materials… the Bloom is now revived, with new batteries and ready to mix. So, I am please with the purchase for now. I will provide an update on the long-term usage of the Bloom fix. I must admin, an alternative option might be the Bodum Schimuna Whisk, which has a piqued my interest. For those of you in the market for a micro whisk/frother, the Bodum Schimuna might make a great client gift at some point.

SHURE and Aupus

Next on the Gadget Backlog, we have the SHURE MV7 USB mic! Initial thoughts – great sound, crisp dynamic tones and easy to use. Another step forward towards audio/video experiences. The microphone includes a desktop friendly microphone stand. MacOS users will need to download the SHURE Application to mix and control the external accessory. There is a bit more work involved in getting around the need to purchase additional cables, XLR adapters or fittings. Look for a deep dive, and pictures to accompany the post.

Moving on, let’s talk about ditching the air duster can for a powerful, corded air duster like the Aupus APAD15BL Air Duster. Air cans have served their purpose for many years, especially when paired with electrical-friendly wipes. While we are on the topic of air gadgets, we have more air tools coming your way – Inflators, Air Compressors, Nailers and more.  The air compressor even comes with a hand air blower tool for outdoor jobs. Like the air blower,  this plug-and-play air cannon offers variable speeds, cleaning tools, and filters. This small, office-friendly tool is handy to have in and around the shop as well. While we are discussing gadgets and tools for the shop/office, we are enhancing the Makey tech tool set by adding a set of Torx screwdrivers (T3 – T10) – Tekprem Torx Screwdrivers.

One downfall I’d like to mention is the integrity of the star and Torx bits. Torx and star bits are delicate and can easily get damaged. A word of caution you have to be careful with nano screws and give it time. Consider replacing the bits or the entire set with a set like these. What I’m observing is that screw lock… can be more beneficial here, but it does take a toll on the micro-bits used to drive in our unwind electronic screws. I’ll provide more feedback and comments on the Torx set and air cannon as we use those items on the bench.

D’Addario celluloid

Finally, last on our big Gadget Backlog list, we picked up a new guitar pick. Most are similar, with smooth or textured surfaces. The main problem I’m having is grip. After a few minutes, grip becomes an issue… it might be the ‘player’, but slippage is a problem. Sweat seems to be the culprit. Odd, huh? So, I’ve added a mixed bag of D’Addario Celluloid picks to the mix. The goal was to switch it up a bit and try something new. I still have a few Fender Celluloid Medium picks and Dunlop Max-Grip variety.

Adventurer Lifevest

Safety Vest – Class 2

Purchase An West Marine Adventurer Lifevest Today

Adventurer Lifevest

Gear – Adventurer Lifevest

Wonder through life, safe and ready to deploy at a moments notice.

Looking for a safe and effective inflatable, the Class 3 inflatable – West Marine Adventurer Lifevest (Jacket) might be just what you’re looking for out on the water, whether on a paddle board or shoreline fishing. Easy-to-wear, easy-to-work, lightweight, first class construction, make it ideal, to have on hand in and around the water. Whether you’re in deep waterline, shallow fishing spots, moderate waste deep water and/or the deep buy the latest (2 Pack) Adventurer Life Jacket.

West Marine makes a great product, offering a lightweight alternative to bulky, foam filled life jackets. It can keep you safe, even inflate itself in times of distress, when you need it most. The float vest has both automatic and manual inflation options. Co2 cartridges will be required, so it’s a good idea to have a few extras in case of an emergency. Neon and slate colors are available, keep you safe in style, with the West Marine Adventurer Lifevest.

Camping on the go, near the shoreline? Looking for a great spot to set up camp? While you’re out on the water, some other tools might come in handy, such as the UST Blast Match for a quick and safe fire. And if you’re in ned of some coffee, the Coletti Camp Pot is perfect for boiling water on the go. It’s a great way to prepare and enjoy a hot pot of coffee while out exploring.

Lifevest
CO2

Co2

Inflation Instructions

Inflation Instructions

Co2

ADD Co2

Rip Cord

Rip Cord

Lightweight

Lightweight

Backup Batteries

Keep Fresh, OEM Batteries

Inmarsat’s Got You Covered In An Emergency

Need Another - Inmarsat

Gear – Full Charge with the Inmarsat Satellite Phone Backup Batteries

Get yourself a backup battery: the BlueCosmo Inmarsat Satphone 2 Battery – OEM  (Original Equipment Manufacturer) batteries.

As storm season rolls in the South and those of you in the Great Northern States dig out of blizzard-like conditions over the weekend, emergency gear becomes a priority. Stay safe and ready. Storms may come and go, but keeping a steady supply of back up batteries, plugs, chargers, etc. can be a logistical nightmare. Having two, backup batteries on hand is always great for when you need them most-like Hurricane Ian.

Like Ian, Michael, Irma or Wilma, it’s important to prepare now. In the event of a catastrophe, I always make sure to a couple of spare items. For example, backup wires or charging cables, to ensure that everything keeps running  smoothly. I recently posted about the OEM battery as a reminder, but perhaps we should also discuss different battery types, such as those from manufacturers, for the sat phone. You can find great gear, parts or Inmarsat Satellite Phone replacement batteries online. Gone are the days of needing multiple batteries for your cell phone.