Author: bjsallee

Posted on

Halot Sky Liner Change Out

Resin Liner Change Out

#halotLiner #creality #3dPrinterProblems #3dIssues #resinLiner

Before you start your own 3d printing, buying a 3d printer etc. Learn how to maintain, troubleshoot and work through printing issues… like misprints (lots), cleaning and scraping resin, swapping resin liners, cleaning resin drip after drip

Attached a few sneak peak video clips and photos of our latest test prints and demos. Got a few ‘real-world’ solutions coming out soon… We will put a few polls out regarding 3d software/applications – Tinkercad, Autocad, Creality (design) software, SolidWorks and more. We’ve started with Tinkercad and Autocad so that we can print prototypes to finish products within a few hours. Got any ideas? Need 3d prints? Leave us a comment, drop us a line on the contact form, please include: file type, filament, sizes etc. Let’s see what we can come up with.

As usual leave a comment below, let us know what you’re thinking?

Halot Liner Before Change Out Halot Z Position
Posted on

New Creality Series

Creality 3d Printing

#creality #ender3 #PLA #halotSky #resin #3dPrinting #3d

3d printing? Got a need, give us a call. We will be posting a bunch of new work in the weeks to come. From testing and prototyping, 3d model printing and extruding, resin printers vs PLA/TPU filament printers, trials and tribulations; i.e. issues we experienced when running our 3d printers.

Attached a few sneak peak video clips and photos of our latest test prints and demos. Got a few ‘real-world’ solutions coming out soon… We will put a few polls out regarding 3d software/applications – Tinkercad, Autocad, Creality (design) software, Solidworks and more. We’ve started with Tinkercad and Autocad so that we can print prototypes to finish products within a few hours. Got any ideas? Need 3d prints? Leave us a comment, drop us a line on the contact form, please include: file type, filament, sizes etc. Let’s see what we can come up with.

As usual leave a comment below, let us know what you’re thinking?

Creality Tablet Prototypes 3d Printers In the Lab
Posted on

NOCO Jump Box

NOCO Boost Plus 12-V Jump Starter Box

#needAJump #battery #JumpStart #SafeJump #NOCO

Recommended: NOCO Boost Plus GB40 1000 Amp 12-Volt UltraSafe Lithium Jump Starter Box, Car Battery Booster Pack, Portable Power Bank Charger, and Jumper Cables for up to 6-Liter Gasoline and 3-Liter Diesel Engines

When you need a jump start… battery dead? Keep a jump in the car. NOCO Boost plus is a safe, accessible, booster pack with jumper cables, ancillary changer for gasoline and diesel engines*. We just used the NOCO jump to start up the ’06 Wrangler… following a recent radio and headlamp update. Of course this doesn’t come without it’s own issues, hence the need for a jump.

We will share the latest radio upgrades at some point, just know we are no longer running the factory lamps, head unit, and speakers – Pioneer, Kicker, Bazooka and more….

As usual leave a comment below, let us know what you’re thinking?

Creality Tablet Creality Tablet Creality Tablet
Posted on

Happy Holidays

Happy Holidays

#holidaySeason #happyHolidays #christmas #hanukka #newYear

Happy Holidays to you and your family… We wish all of you a happy and healthy New Year.

Just a few more days remain here in 2022, the holiday season near it’s apex; holiday season in full swing. As we reflect on the year, the ups and downs, stuggles and wins. We are thankful for our family, friends, customers and those who share in our lives. While the holidays come and go, stay warm, try something new!

We want to wish all Happy Holidays – Merry Christmas, Happy Hanukka and a Happy New Year.

Posted on

CoC: Legend League Update

CoC: Legend League at 5000+ Trophies

#CoC #legendLeague #5000+ #trophyPush #clash #clashOn #ClashOfClans #superCell

Legend League Updates – Level 15, Hero Updates… Legend League. The trophy push has ended for now, topping 5095 for now. No need to continue as I’ve got upgrades: heros, defensive troops/buildings, new pets to upgrade.

Picking up where we left off, the latest post being the new level 15 TH upgrade, new characters, pets and more… Since then, we’ve been fighting out, making a strong trophy push, a push to see where we can go without trouble. Legend league is different than normal play, with limitations on battles per day, trophy retention etc. “We battled around, and found out”. Quickly finding out, our clan or TH status is not ready for primetime. The Legend League it self is different, fun* and another interesting take on the game… *fun being relative here, the league is no joke. We are able to maintain ~100 without losing or gaining trophies, but this kills upgrades. As far as our th/clan setup, it’s not ready for primetime as mentioned above. It needs some work as it is not ready for the onward and upward slog within the league.

This particular profile is unique to my others, probably used the most, certainly has the most troops upgrades. That said, any one and everyone can make the Legen League with some stipulations… Although any CoC member can trophy push past the 5000+ mark, the catch; there are far more players maxed out waiting to ‘take your lunch money’. CBA (Cost-to-Benefit)/ROI (Return of Investment) whichever one you want to use here – Mild benefit with a non-maxed clan, no gold lost… If you need to upgrade, my suggestion is to drop out and farm until you can max your clan. Of course, you can’t make money, elixir or dark elixir to max your TH either. 8 battles a day, you get what you earn during those battles… at the end of the day, trophies earned or taken are added/subtracted from your total and those who remain above the 5000+ threshold remain. Caveat, I’m now just below 4800 trophies, on my way down… still, I remain in the league. This was a good test for my clan/th, much more work needs to be done to get this profile up to the level needed to compete in the Legend League. Enjoy, Clash On.

Leave a comment below, let us know what you’re thinking?

Clash Screens Clash Screens Clash Screens Clash Screens Clash Screens Clash Screens
Posted on

Creality – Endur, Halot (Resin) or Prusa 3d

3d Printers/Resin Printers – Creality or Prusa

#endur #halot #prusa #3DPrinter #CandC #dremel

With the holiday season in full swing, thought it might be worth while to do our research on a 3d printer… Extruded filament or resin? Which brand should we choose? Cost/Benefit?

We found one that fit our needs, more information once the device has been recieved, we’ll post an update on the device, 3d lab startup, first runs etc.

Let me know in the comments below, do I go Prusa or Creality Endur series or Halot Series… There are a couple different models, filament types, series etc. to choose from; we are looking at the Ender 5 Plus, Halot Series (Resin) vs the Prusa I3 MK3S+. Perhaps some other tools to go with the printer as well, wash/cure, filament, bed, boxes/enclosures etc. Lot’s of etc etc. The point is we are looking for the best option for us, help us understrand why and what might have been part of your decision to purchase a 3d printer. Should we choose something else? Dremel, MakerBot, Ultimaker, LulzBot… more out there, but we cut the list down to the two noted above.

As usual leave a comment below, let us know what you’re thinking?

# #
Posted on

Schumacher 100Amp 100/30/6/2

Schumacher SC1308 100/30/6/2 Amp – Charger/Starter

#schumacher #100Amp #100/30/6/2 #stn #CandC #dremel

In the field, around the shop, need a jump? Give Schumacher a try… tremendous help in a pinch, supports longterm life and care for your car, marine or small atv/SxS batteries.

100 A engine start | 30 A boost | 6<> 2 A charge/maintain for advanced diagnostic testing, engine starting and charging – Powerful enough for starting SUVs, trucks and large batteries – Battery and alternator tester ─ provides charge level and helps diagnose electrical problems – Digital display, LED indicators and button controls ─ for ease and accuracy – Microprocessor controlled ─ automatically adjusts the amperage rate to charge and maintain – Multi-stage charging for added precision, safety and battery life – Float mode monitoring ─ automatically maintains optimum battery charge – Auto voltage detection ─ 6 or 12 volt – Reverse hook-up protection ─ charger will not operate if clamps are reversed; LED will flash}

As usual leave a comment below, let us know what you’re thinking?

Posted on

CoN: S.A. Coalition Win

CoN:WWIII

#conflictOfNations:WW3 #iphone #game #CoN

Coalition Win – 4th Place

…Game over… ending with a win, 4th place. In this case, the South American Coalition won, propellting me to a 4th Place overall finish. JMVH taking home 1st with 3414 provinces and cities conquered. Check out CoN:WWIII online now… We’ll be back online later this week, perhaps next for our next game. Also, look up my username – ‘sudosen’ for more details.

Leave a comment, let us know what you’re thinking?

# # # # # # # # # # # # # # # # # # # # # #
Posted on

AppleTV 4K, MagSafe Battery Pack

AppleTV 4K, MagSafe Batter Backup

#apple4k #appleTV #appleTV4K #tvUpgrade

Update: AppleTV 4k

Running an older AppleTV 4K to compliment the 4k monitors; time for an upgrade. Today is that day… I’ve decided to update the office AppleTV to AppleTV 4K so to match resolutions, color etc via dual screens, used as separate displays. The purpose, MBP has some shortcomings, as you may or may not know, first is the limitation of dual-monitors or multi monitors NOT Apple branded. Again, a new limiation per say, not sure why this might be the case; you might be able to guess. So, I’ll leave that to your imagination or decression to suss out. The goal really is to use the new (4K) version so that I’m not required to adjust resolutions 3840 x 2160 over multi monitors (more than one) while reducing resolution/reducing pixel space via MBP settings for desktop views, apps, windows etc. That said, the new MBP still needs some work, I will be frank… I’m not a fan of the limited HDMI connections without Apple specific dongles or Apple Monitors. Ultimately, I need to do something about this at the hardware level while desiring to run dual screens without Apple branded screens, monitors, tv’s. Again, this is self imposed limitation without dongles. Unfortunately, I’ve tried multiple dongles or HDMI extender hardware/software without issue. iCreate products have their own limitations, screen observations etc. meaning Apple OS updates create software problems by iCreate device for months… when the idea is simple, simply run multiple screens, as separate screens with the same resolution. More on the AppleTV 4K to come. In the meantimed, let’s cover the MagSafe Battery Pack

Trips, Travel in your near future? Tired of shorterm battery usage, removing apps and settings to preserve battery life? Add a Apple Mag Safe Battery Pack. I(we) added the Apple Mag Safe for long-term battery needs, away from the office, travel, to the store… This is a great idea for those of you running ‘hot’, you know, those of you running Netflix, Peer to Peer Gaming etc. those kinds of things while not tethered to a wall jack. Let’s start there, buy one… I’ll give you my final ‘verdict’ in a couple weeks, check back soon.

As usual leave a comment below. Have feedback on the MagSafe Batter Pack? Apple TV 4K, MBP? Let us know what you’re thinking?

Posted on

Year End

Sallee Technology 4th Quarter

#4thQuarter #st_new #stOutput #newYear

…closing out a strong 4th quarter, planning, developing and improving customer experience; here’s to new solutions in the new year.

4th quarter, year end; new creations and solutions coming in the new year. As we look back on the year, some rocky, others uneventful… solid progress forward. We continue to grow, improve our relationships and sharing new tech exclusives, painful learning lessons and a fresh outlook for the new year.Looking to start the new year on the right ‘foot’? Give us a call, we are currently working our first and second quarter backlogs, looking forward to the new year.

Happy to help, reach out via email, phone or connect with us via online form.